2
INTRODUCTION
Thank you for purchasing a
KENYON
®
Alcohol stove. The operation instructions that follow are for the
model 113 single burner alcohol stove. These units feature counter-top mounting, self-priming / self
pressurized alcohol burners.
KENYON
®
marine stoves have been engineered exclusively for the marine
environment. Design considerations and materials were dictated by the requirement for safety, reliability,
long life, low maintenance, and operation in a salt atmosphere.
UNPACKING YOUR
KENYON
®
STOVE
Carefully unpack your
KENYON
®
Stove from its shipping container. Do not discard the shipping carton or
protective foam. It may be useful if your unit ever needs to be serviced.
Verify and Identify Package Contents. The following items should be included in the carton:
1- Alcohol Stove
1- Fill Bottle
2- Warning Labels (only applies to stoves without Glass Lid)
1- Installation and User’s Guide
If any of these items are missing, please contact
KENYON
®
Customer Service at (860) 664-4906 or via
e-mail: customercare@kenyonappliances.com
INSTALLATION INSTRUCTIONS
IMPORTANT :
PLEASE READ THESE INSTRUCTIONS COMPLETELY
BEFORE INSTALLATION AND OPERATION OF THE APPLIANCE
DO NOT DISCARD THIS MANUAL. KEEP THIS MANUAL AND
INSTRUCTIONS FOR FUTURE REFERENCE
NOTE:
Installation should comply with ABYC standard A-3, “Recommended Practices and Standards
Covering Galley Stoves,” and/or the “Fire Protection Standards for Motorcraft” NFPA #302.
MOUNTING THE ALCOHOL COOKTOP
LOCATING THE COOK TOP AWAY FROM FLAMMABLE MATERIALS
Before you cut your countertop:
Make certain the Cook Top will be far enough from flammable
materials!
! CAUTION
Do not cut the opening in your countertop until you ensure that there will be adequate horizontal and
vertical clearances from the Cook Top to the nearest flammable materials- fabric, plastic, wood- (except
the countertop itself).
Minimum Distances are:
40cm (16”) Horizontally 1M (39”) Vertically
!
