Operation
Touch Controls
Power ON Indicator
This display indicates whether the grill is ON
or OFF
Power Level Display
Digital display indicates heat output of the
selected element. The indicator lamps follow
the sweep of the screened graphic. There are
eight possible heat levels.
(+) Power Sensor
Touching this sensor will increase the heat
output of the selected element in increments
of one.
(-) Power Sensor
Touching this sensor will decrease the heat
output of the selected element in increments
of one.
Power Level Graphic
Depicts the level of heat output by the
element. The line sweeps from thin to thick,
indicating low to high power.
Master Power Sensor
This is the main power control for the selected
element. Touching this with the element OFF
will activate the controller and turn the element
ON. Touching this sensor with the element on
will shut the element OFF.
POWER LEVEL
DISPLAY
MASTER
POWER SENSOR
POWER LEVEL
GRAPHIC
POWER ON
INDICATOR
(-) POWER
SENSOR
(+) POWER
SENSOR
CONTROL GRAPHICS
Calibration
Upon application of electrical power to the
cooktop, the controller will run a
self-calibration process. The controller will
then sound an audible confirmation tone and
the display will briefly illuminate. The cooktop
is now ready to be used.
13
THIS SECTION ONLY PERTAINS TO COOKTOPS THAT
DO
NOT HAVE A LOCK FUNCTION
. IF YOUR COOKTOP HAS THIS
FEATURE PLEASE REFERENCE PAGES 11 AND 12.
IMPORTANT!
The glass panel must be clean prior to
powering on to ensure
proper calibration.
