Operation
Automatic Shut-Off
The cooktop is programmed to automatically
shut-off if it is left unattended for an extended
period of time. If left on high (8), it will switch off
after one hour if no control changes are made.
This time period is dependant upon the power
level. The lower the power level, the longer the
time period (maximum time is 2 hours).
The control will also power off after ten seconds
if a heat setting is not selected upon initially
applying power to the cooktop. The table below
provides the auto shut-off time for each power
setting.
SETTING
USES
1 Bar
Melting butter and chocolate
Heating delicate sauces
Warming food
2 Bars
Simmering sauces
Steaming rice
Melting large quantities
3-5 Bars Steaming vegetables
Heating soups, pudding and milk
Simmering
Frying
5-7 Bars Sauteing
Quick frying
Browning
Boiling of large quantities
8 Bars
Boiling water
Deep frying
Temperature Setting Guide
POWER ON
INDICATOR
MASTER
POWER SENSOR
Energizing the Elements
To turn the selected element ON, touch and
hold the Master Power Sensor for two seconds.
The controller will then beep and the Power On
Indicator will illuminate.
Heat Settings
Your KENYON cooktop has 8 different heat
settings, from 1 through 8, selected using the
(-)
and
(+)
sensors. The heat setting is displayed
as shown below. The heating element cycles
at different time intervals to vary the heat level.
As the setting is increased, the heating element
will remain on for a longer period, increasing the
cooking temperature of the grill.
POWER LEVEL
DISPLAY (HEAT
SETTING 8
SELECTED)
SETTING
AUTO SHUT-OFF (min)
1
90
2
90
3
90
4
60
5
60
6
60
7
60
8
60
14
