14
Grill Parts
Heating Elements
The heating elements are designed to pivot as
shown to remove/replace the baffle tray and drip
trays. They will stay in the up position. To put
down apply slight downward pressure.
Baffle Tray
The baffle tray supports the drip trays, heating
elements and grates and must always be used
when operating the grill. The cross bar must
also be installed to support the elements and
grates.
Drip Trays
The disposable drip trays collect all the fat and
juices created during the cooking process. The
drip trays must be emptied after each use. When
replacing the drip trays, position the drip trays
so that they are completely contained inside the
baffle tray and ensuring that the side or the rim
of the drip trays do not protrude outside of the
baffle tray.
To prevent the contents of the drip trays
from smoking, place 1 cup of water (or
enough to cover the bottom of the pan)
in the drip trays before cooking.
The
replacement for the disposable drip tray is
Kenyon part #B96001.
Grates
Grates must be cleaned after every use. The
grates have a nonstick coating for ease of
cleaning. Wash grates after each use in warm
soapy water.
Grill Operation
Drip trays must be contained
inside of heat baffel as shown
Cross bar
must be in place
as shown
CROSS BAR