128
Note:
Set Style Attributes
Set Style
Parameters
Description
Set
constant
Set value
When pressed, preset
Set value
data is written to the designated
word.
Design Tip:
Use to put fixed data
into words. Examples: force default
values; return to home positions;
Design Tip:
Use the JOG attributes to create Thumbwheels,
/-, and Spin controls.
Add value
(JOG+)
Inc. value
Upper limit
Maximum:
32767
Every time pressed, the
Inc. value
is added to the designated word, if
the result is not larger than
Upper
limit
.
Sub value
(JOG-)
Dec. value
Bottom limit
Minimum:
-32768
Every time pressed, the
Dec.
Value
is subtracted from the value
of the designated word, if the result
is not less than
Bottom Limit
.
JOG++
Inc. value
Upper limit
JOG delay
JOG speed
Maximum:
32767
When pressed, the
Inc. value
is
added to the designated word at
regular intervals as specified by
JOG delay*
and
JOG speed*
, if
the result is not larger than
Upper
limit
.
JOG- -
Dec. value
Bottom limit
JOG delay
JOG speed
Minimum:
-32768
When pressed, the
Dec. value
is
subtracted from the value of the
designated word at regular
intervals as specified by
JOG
delay*
and
JOG speed*
, if the
result is not less than
Bottom
limit
.
*JOG Delay
: The interval that the part must be touched before repeat action occurs.
*JOG Speed
: The interval between repeat actions once repeating begins.
Note:
Interval times in actual operation may vary from specified. Do not use HMI intervals for critical timing.
Set Style
Parameters
Description
Set at
window
open
Set value
When the window containing this
part is opened, the
Set value
data
is written to the designated word.
Design Tip:
Use this attribute to
send the window number to the
PLC so it knows what window is
open.
Set at
window
close
Set value
Set value
data is written to the
designated word automatically
when the window containing it is
closed.
Design Tip:
Use this attribute to
force the password state to 0 when
a secure window is closed.
Summary of Contents for MMI-1500
Page 2: ...ii...
