145
Step 5: Create a Direct Window object that is triggered by an
appropriate bit that calls up the keypad into it. Once placed, adjust
the Profile to be the same size as the dimensions of the keypad
window. Do not place the Direct Window over top of the Numeric
Input objects.
For our example, the
Direct Window
object is triggered by
LB9068 (System’s
Input Active bit) and
calls up Window 20.
The Profile is set to
160W x 160H.
Step 6: Save, Compile and Simulate to verify proper operation.
When the Data Input object is touched the keypad should pop up and data entry should be activated. Enter a valid number,
the keypad should disappear.
Summary of Contents for MMI-1500
Page 2: ...ii...
