21
4. Select the
Display Mode
….
Landscape Portrait
5. Select the Language Mode….
This setting determines the character set that is used in project development.
Select
Single Byte
for European languages. These fonts are in the directory as Ascfont.8, Ascfont.16 and Ascfont.24.
These represent the 8, 16 and 24 point sizes. Larger sizes are generated from these base sizes (Example: Font size
32 is actually size 16 doubled).
Select
Double Bytes
for Asiatic languages. Use the Font setting in the System Parameters Editor Tab to select the
appropriate character set.
Then click,
OK
.
5.4 Creating a project
A project file (*.epj FILE) is simply a collection of all the windows and window data used by an application.
Step 1.
Select
Edit|System Parameters...
and the following screen appears. Fill in the system parameters. Use the
PLC
Tab to select the set up the parameters for communicating to the PLC.
a.
Select the
PLC type
from the dropdown list.
b.
Confirm that the
HMI Model
is the one you
are programming.
c.
Check the communications settings:
Serial I/F port
Baud rate
Data bits
Parity
Stop bits
HMI station No.
PLC station No.
Set the communications parameters to match
the PLC. (See the Controller Reference Guide
for details.)
Note:
The
General, Indicator, Security, Editor,
Hardware
and
Auxiliary Port
tabs are used for
other settings. See Section 2.0 for full details.
For a quick start, these settings can be left at
their defaults.
Summary of Contents for MMI-1500
Page 2: ...ii...
