21
2. Designated use
2.1 Intended purpose
The clipper is exclusively intended for clipping cattle, horses or large dogs. Any other use, in particular on
humans, is explicitly prohibited.
2.2 Technical data
Clipper
Model designation
FarmClipper Akku
Voltage
10.8 V
Motor power
45 W
Speed
2300 rpm
Amplitude of swing
6.5 mm
Dimensions (W/H/L)
Approx. 80 mm x 80 mm x 315 mm (Include Battery cartridge)
Weight
1250 g (Include Battery cartridge)
Battery cartridge
Battery cells
6 x 3.6 V Li-ion battery cells
Voltage
10.8 V
Capacity
3000 m Ah
Overload current
10 A
Weight
360 g
Charger
AC input
100 – 240 V, 50 / 60 Hz, 35 W
DC output
13.7 V 2 A
Operating temperature 0 – 40 °C
Weight
320 g
2.3 Equipment
1 shearing machine with shearing head, 1 set of shearing blades (mounted), 2 batteries,
1 small bottle of oil, 1 screwdriver, 1 manual and 1 storage case
3. Initial commissioning
3.1 Inspection and operating instructions
The inappropriate use of electrical devices, in particular animal breeding devices, is dangerous!
Therefore, observe the following, accident prevention measures before starting the machine:
• Never switch the machine on without properly mounted cutting tips • The voltage stated on the nameplate
must match the mains voltage • Avoid all contact with the moving shearing blades • Only place the machine
on dry surfaces and store in a dry location • Avoid all contact with a machine that is in contact with liquids.
Never shear wet animals. Liquid ingress into the machine reduces the electrical insulation. Only clean the ma-
chine with a dry cloth and a brush or paintbrush • Switch the machine off (fig. 3) before changing the battery
pack • Do not use damaged shear blades with broken off teeth. Only use sharp shear blades. Only use the
original shear blades • Never insert an item into an opening of the machine. The machine noise can disturb
animals. A kick or the weight of the animal can result in substantial injuries. Therefore fixate the animal suf-
