Chapter 6
Internet Connection
56
Resulting interface configuration
When you finish set-up in
Traffic Policy Wizard
, the resulting configuration can be viewed
under
Configuration
→
Interfaces
and edited if desirable.
Figure 6.3
Configuration of interfaces — connection by a single leased link
The
Internet Interfaces
groups includes only card
Internet
selected in the third page of the
wizard. Other interfaces (including
Dial-In
) are considered as segments of the LAN and put in
Trusted / Local interfaces
.
If the setting does not mirror the real configuration of the network correctly (for instance there
is an interface planned for
), you can move the particular interface to
Other Interfaces
.
For these interfaces, it will be necessary to define corresponding traffic rules manually (see
chapter
).
It is also possible to add new interfaces to the
Internet Interfaces
group.
will then be
routed to corresponding target networks in accordance with the system routing table (see also
chapter
) and IP address translation will be applied (
). However, such configuration is
not significantly helpful in place.
Warning
It is necessary that in the
Single internet Link
mode the default gateway is set only at the “main”
Internet interface! If
WinRoute
detects more default gateways, error is announced. Solve this
problem immediately, otherwise traffic from the firewall and the LAN to the Internet will not
work correctly.
Summary of Contents for KERIO WINROUTE FIREWALL 6
