Chapter 7
Traffic Policy
80
Warning
If either the source or the destination computer is specified by DNS name,
WinRoute
tries to identify its IP address while processing a corresponding traffic rule.
If no corresponding record is found in the cache, the
DNS forwarder
forwards the
query to the Internet. If the connection is realized by a dial-up which is currently hung-
up, the query will be sent after the line is dialed. The corresponding rule is disabled
unless IP address is resolved from the DNS name. Under certain circumstances denied
traffic can be let through while the denial rule is disabled (such connection will be
closed immediately when the rule is enabled again).
For the reasons mentioned above we recommend you to specify source and destination
computers only through IP addresses in case that you are connected to the Internet
through a dial-up!
•
IP range
— e.g.
192.168.1.10
—
192.168.1.20
•
IP address group
— a group of addresses defined in
WinRoute
(refer to chapter
•
Subnet with mask
— subnet defined by network address and mask
(e.g.
192.168.1.0/255.255.255.0
)
•
Network connected to interface
— selection of the interface or a group of interfaces
from which the packet comes in (
Source
) or via which they are sent out (
Destination
).
Figure 7.10
Traffic rule — selecting an interface of a group of interfaces
Groups of interfaces allow creation of more general rules independent from any partic-
ular network configuration (e.g. it is not necessary to change such rules when Internet
connection is changed or when a new LAN segment is added). It is recommended to
define traffic rules associated with groups of interfaces wherever possible. For details
on network interfaces and groups of interfaces, see chapter
Note:
Only the
Internet interfaces
and the
Trusted / Local interfaces
group can be used
in traffic rules. Another method is used to add interfaces for
Kerio VPN
(see below).
The
Other interfaces
group includes interfaces of various types that were not filed in
another group. For this reason, traffic rules for such group would not be of much use.
•
VPN
— virtual private network (created with
Kerio VPN
). This option can be used to
add the following items:
1.
Incoming VPN connections (VPN clients)
— all VPN clients connected to the
WinRoute
VPN server via the
Kerio VPN Client
2.
VPN tunnel
— network connected to this server from a remote server via the VPN
Summary of Contents for KERIO WINROUTE FIREWALL 6
