Chapter 7
Traffic Policy
82
Note:
1.
If you require authentication for any rule, it is necessary to ensure that a rule ex-
ists to allow users to connect to the firewall authentication page. If users use each
various hosts to connect from, IP addresses of all these hosts must be considered.
2.
If user accounts or groups are used as a source in the Internet access rule, auto-
matic redirection to the authentication page nor NTLM authentication will work.
Redirection requires successful establishment of connection to the destination
server.
If traffic policy is set like this, users must be told to open the authentication page
(see chapters
and
) in their browser and login before they are let into the
Internet.
This issue is described in detail in chapter
.
•
Firewall
— a special address group including all interfaces of the host where the fire-
wall is running. This option can be used for example to permit traffic between the
local network and the
WinRoute
host.
Use the
Any
button to replace all defined items with the
Any
item (this item is also used by
default for all new rules). This item will be removed automatically when at least one new item
is added.
Use the
Remove
button to remove all items defined (the
Nothing
value will be displayed in the
item list). This is helpful when rules are changed — it is not necessary to remove items one
by one. Whenever at least one item is added, the
Nothing
value will be removed automatically.
If the
Nothing
value is kept for the
Source
or/and
Destination
item, a corresponding rule is
disabled.
The
Nothing
value takes effect when network interfaces (see chapter
) and users or groups
(see chapter
) are removed . The
Nothing
value is automatically used for all
Source
,
Desti-
nation
or/and
Service
items of rules where a removed interface (or a user account, a group or
a service) has been used. Thus, all these rules are disabled.
Definition of rules with the
Nothing
value in any column is not of any use — it is more useful
to use the checkbox in the
Name
column instead to disable a rule.
Note:
Removed interfaces cannot be replaced by the
Any
value, otherwise the traffic policy
might be changed fundamentally (e.g. an undesirable traffic might be allowed).
Service
Definition of service(s) on which the traffic rule will be applied. Any number of services defined
either in
Configurations
→
Definitions
→
Services
(see chapter
) or using protocol and port
number (or by port range — a dash is used to specify the range) can be included in the list.
Use the
Any
button to replace all defined items with the
Any
item (this item is also used by
default for all new rules). Whenever at least one new service is added, the
Any
value removed
automatically.
Summary of Contents for KERIO WINROUTE FIREWALL 6
