Kermann Technical Developer and Consulting Ltd.
Phone:
(+36) 1 445 1670
E-mail:
3
Overview
We are glad that you opted for our Product, made by Kermann Technical Developer and Consulting
Ltd., to serve your lighting technology needs. To ensure a safe and uninterrupted use of the Product,
prior to deployment and installation, please carefully study this User Manual. Given that this Product
is designed for use in industrial areas with explosion hazard, strict compliance is required with the rules
on avoiding ignition effects. We do hope that this Product will serve you well over the long run, and
meet your expectations.
1.
General description of the product
Our Company, Kermann Technical Developer and Consulting Ltd. is engaged in the design and
manufacturing of LED lighting equipments, for industrial use. Our Kermann ExProof EasyLight Z1
luminaire is primarily designed for general lighting purposes, at low to medium heights. One of its
particular features is that it can be safely used in areas with explosion hazard, subject to compliance
with the applicable rules. The light source is a LED unit of substantially high efficacy. Due to its robust
design, the luminaire is environmentally resistant (IP67 and IK09), and tolerates all other normal
operational impacts during industrial use.
Our Kermann ExProof EasyLight Z1 high performance and high efficacy LED luminaire is a perfect
solution to replace the conventional luminaires typically used - usually T8 type fluorescent luminaires
of 2x18W, 2x36W and 2x58W, high pressure sodium luminaires of 50W, 70W and 100W, and high
pressure mercury luminaires of 50W, 80W and 125W - in Zone 1 classified hazardous industrial areas
for general lighting. Due to its high overall system level efficiency, when this Product is used to replace
the previous system, the overall electricity consumption can be reduced, or the overall lighting level
can be enhanced, as needed.
This luminaire is of robust industrial design, made with an aluminum structure and a tempered glass
optical unit, to ensure that it is compliant with environmental resistance levels IP67 and IK09. This
Product can be used in Zone 1 classified hazardous areas, without any operational restrictions applied.
The luminaire’s housing is compliant with the ATEX standards of increased safety protection mode,
and the electronic space is compliant with the ATEX standards of encapsulation protection mode.
The typical beam angle of our LED luminaire is either 60° or 90°, as two optical options provided,
therefore it is perfectly suitable to provide lighting both at low heights (up to 5 m), and higher heights
(8 to 9 m).
With its multipurpose hanging bracket it can be easily mounted and fixed to the ceiling, and with
various attachment to the side walls, on light poles, or onto pipe bridges.
This explosion-proof LED luminaire is also available in dimmable version. The dimmable version is
suitable for dimming via 1-10V DC or 10V PWM methodologies. The design and installation of the other
parts of the power control system shall always be in full compliance with the standards applicable to
hazardous environments, which goes beyond the scope of the Product, and this User Manual.
