8
6
3
4
5
12
8
11
10
7
9
2
1
Diagram of central bracket (MK)
Designation
ZB04740001
ZB04750001
1
Support foot 245 mm
1
1
2
Connecting tube +
upper part 300 – 500 mm
1
-
2
Connecting tube +
upper part 600 – 900 mm
-
1
3
Connecting bracket
1
1
4
Support tube
2
2
5
Bracket support
4
4
6
Type 20-33 support
2
2
7
Cap
2
2
8
Hook for standing bracket
1
1
9
Set screw
2
2
10
Hex nut
1
1
11
Washer
5
5
12
Cheese-head screw
4
4
Positioning the standing brackets
Ŷ
Depending on the overall length, install the
flat radiator with the standing brackets in
the specified positions (Fig. 3).
Ŷ
Observe all instructions, in particular tho-
se relating to the technical data and usage
limits.
Ŷ
Ensure the mounting brackets are in their
protective packaging during transport and
storage.
Pre-assembly of standing brackets up to
L ≤ 1600 (ZB04720001; ZB04730001)
Ŷ
Prepare tools and fastening materials
(screws, washers and dowels) (Fig. 1).
Ŷ
Insert the caps (7) into the two lateral
openings on the support tube (4) (Fig. 5).
Ŷ
Insert the bracket supports (5) into the two
designated holes in the support tube (4)
(Fig. 5).
Ŷ
Screw the set screw (9) half way into the
carrier tube (4) (Fig. 5).
Ŷ
Slide the pre-assembled support tube (4)
onto the connecting tube and upper part
(2) (Fig. 7/8).
Ŷ
Secure the support tube with the set screw
(9) (Fig. 8).
Ŷ
Attach the connecting tube and upper part
(2) to the support foot (1) and secure it with
the cheese-head screws, which are already
pre-assembled ex works (not for standing
brackets with radiator).
Ŷ
Insert the support (6) at the top of the up-
per part (2) in the correct position (Fig. 8).
Ŷ
Refer to the table in Fig. 10 for the moun-
ting dimensions for the standing brackets
on the radiator.
