HFD-BA-e-1820
27
6.8
Totalization (only devices not designed for verification)
With this function the individual weighing values are added into the summation
memory by pressing the M+ key and edited when an optional printer is connected.
•
With active totalizing function the
[
]
above „M+“ appears.
•
The totalizing function is not active when the weight is under 20d.
•
Only stable weighing values can be totalized.
Hook-on the item to be weighed
A
.
Wait for stability display, then press the
M+
button.
"ACC01" followed by the weight value will be displayed. The weighing value is
added into the summation memory.
Remove the weighed good. More weighed goods can only be added when the
display ≤ zero.
Suspend the item to be weighed
B
.
Wait for stability display, then press the
M+
button. The weighing value is added
into the summation memory. Number of weighings, "ACC02" followed by the total
weight will be displayed for 2 sec. After that the current weighing value is
displayed.
Add more weighed goods as described before.
Please note that the crane scales must be unloaded between the individual
weighing procedures.
You can repeat this process until the capacity of the crane scales is exhausted.
Display sum total:
When zero is displayed, press the
M+
key, the number of weighings followed by the
total weight will be displayed for 2 sec.
Delete sum memory:
When zero is displayed, press the
M+
key, the number of weighings followed by the
total weight will be displayed for 2 sec. During this display press the
ZERO
key anew.
The data in the summation memory are deleted. The [
] above “
M+”
extinguishes
Summary of Contents for HFD 10T-3
