PCD-BA-e-1211
17
7.5 Pre-Tare function
MODE
CAL
Using this function the weight of a tare vessel is stored. Even
after turning off/on the weighing balance will continue working
with the saved tare value.
In weighing mode put tare vessel on the weighing plate
Press repeatedly the
MODE
key until „
PtArE
“ flashing
appears.
Use
SET
key to store the current weight on the weighing
plate as a PRE-TARE value.
Delete PRE-TARE
value
MODE
CAL
Unload the balance and set the
TARE
button to zero
Press repeatedly the
MODE
key until „
PtArE
“ flashing
appears.
Use the
SET
key to confirm. The PRE-TARE value is
deleted, the zero display appears.
7.6 Plus/minus weighings
TARE
For example unit weight control, fabrication control etc.
Put the nominal weight on the weighing plate and tare
using the
TARE
button.
Remove the nominal weight
Put the test objects subsequently on the weighing plate,
the respective deviation from the nominal weight is
displayed with the respective sign
to „+“ and „-“.
According to the same procedure also packages with the
same weight can be produced, referring to a nominal
weight.
Back to weighing mode by pressing the
TARE
button.
