32
PCD-BA-e-1211
8.4 Interface parameters
Data output is carried out via interface RS 232 C.
General
The previous condition for the data transfer between balance and a periphericall
device (e.g. printer, PC ...) is that the appliances are set to the same interface
parameters (e.g. baud rate, transfer mode ...).
8.4.1 Data transfer mode
In weighing mode keep the
key pressed until “
Unit
“
appears.
Press the
MODE
button several times until „
Pr
“ is displayed.
Acknowledge using
SET
key, the current setting is displayed.
Select the desired settings by pressing the
MODE
key
rE CR
Data output via remote control commands
Pr PC
Data output using the
key
AU PC
Continuous data output
bA Pr
Output on bar code printer
AU Pr
Autom. data output of stable weighing values
Use the
SET
key to confirm selection. The balance returns to
weighing mode.
