12
YKI-03-BA-e-2011
⇒
Click on the „Real COM“ link to open the configuration of the first port:
⇒
For „operation mode“, choose „TCP Server“ (instead of „Real COM“) and submit
the form.
⇒
Configure the RS-232 communication parameters, so they
match with the ones of the RS-232 device to be connected. To
do this, choose the menu item
„Serial Port Settings“ -> „Communication Parameters“:
The adapter is now set up for operation as a “TCP Server”.
Depending on the application, you are now be able to retrieve the measurement data at
the IP address and port number used.
