9
7
1
2
1. Use the Adjustment keys (
▼
hour /
▲
min.) to adjust the
temperature.
2. Adjust the temperature using the key on the right (
▲
min.) to set
the temperature to a higher setting and the key on the left
(
▼
hour ) to lower the temperature.
3. Until the room temperature has reached the set temperature, the heater will burn at either
high or medium burning mode. When the room temperature reaches or slightly exceeds
the set temperature, the heater will automatically shift to maintain the desired
temperature.
NOTE: The standard setting of the heater is 20°C. However, once the set temperature has
been changed the new setting will remain in effect unless changed.
NOTE: Room temperature measurements are taken directly behind the heater. These
measurements may not represent the true room temperature.
TEMPERATURE REGULATION
LC-32F (GB) 12.9.3 11:39 AM ページ 7
SAVE OPERATION
The “SAVE” function allows you to limit the temperature. When this
function is activated, the heater will automatically switch off, when
the room temperature exceeds the set temperarure by 3ºC.
Subsequently, when the room temperature has dropped again to
the set temperature, the heater will automatically switch on again.
Activate the “SAVE” setting by pressing the Save key. The Save
indicator will light up. Switch off the function by pressing the Save
key once again.
NOTE: Without the “SAVE” setting your heater will maintain the set temperature by
approximation as well, by adjusting its heating capacity. “SAVE” is an economy
setting, which you can use when, for instance, you are not present in the room or to
keep it frost-free.
8
The childproof lock can be used to prevent children accidentally
changing the heater settings. When the heater is burning and the
childproof lock is on, the heater can only be switched off. Other
functions are blocked then. If the heater has already been switched
off, the childproof lock also prevents accidental ignition of the
heater.
Activate the childproof lock by pressing the Key-lock button and holding it down for more 3
seconds. The Key-lock indicator will light up indicating that the childproof lock has been
activated. Switch off the childproof lock by pressing the Key-lock button and holding it down
for more than 3 seconds once again.
CHILDPROOF LOCK
When the VENT indicator starts blinking, this is a sign that the room
is not vented sufficiently. If you do not provide additional ventilation,
the heater will switch off automatically after some time. If the
indicator light continues blinking after extra ventilation, please
contact your dealer.
VENTILATION INDICATOR
When the Fuel indicator lights up, there is enough fuel left for
another 10 minutes of heater use. The count-down of the remaining
heating time can be seen in the information display. Every two
minutes an alarm signal is sounded, warning you to refill the
removable tank. If you do not react, the heater will extinguish by
itself. The heater will also sound a warning signal, when it switches off. The Fuel indicator will
blink, while four lines are blinking in the information display. You can stop this by pressing
the
button once.
Once the heater has used up all its fuel and extinguished, it will take some time, after the
refill, before the heater is completely ready for use again.
FUEL INDICATOR
LC-32F (GB) 12.9.3 11:39 AM ページ 8
Activate the childproof lock by pressing the Key-lock key and holding it down for more 3
activated. Switch off the childproof lock by pressing the Key-lock key and holding it down