background image

WARRANTY

Kerrick Group of Companies warrants this product against defects in material and workmanship for a period of 
12 months from the date original purchase by the first purchaser as shown on the warranty registration card 
supplied with the product.

If, within the period of the warranty, the purchaser returns to our factory or authorised Kerrick service outlet with 
satisfactory evidence of purchase date freight prepaid for both delivery and return, any parts or product claimed 
to be defective, Kerrick will, at its option, repair or replace any such defective parts if Kerrick deems them to be 
defective. The purchaser shall, however, be responsible for any removal or installation charges relating to the 
said parts and such replacement or repair shall constitute the sole liability of Kerrick and the sole remedy of the 
purchaser.

Without limiting the generality of the foregoing, but subject to any relevant statute, this warranty shall not cover 
replacement or repair on account of fair wear and tear, faulty operation contrary to Kerrick's printed instructions, 
unauthorised repair or alteration, negligence, misuse, incorrect operation or accident, failure to service filter or 
motor flooding, or using domestic designed equipment for commercial or industrial purposes.

No warranty is given for equipment that has been serviced or repaired by Kerrick. other than for new parts supplied 
during such repair.

This warranty is given in lieu of all other warranties, whether express or implied, all of which are hereby excluded, 
subject nevertheless to any applicable provision of any act or statute.

Sydney 

98 Carnarvon Street, Silverwater, 2128.  

(02) 9737 9797

Melbourne  20 Egan Road, Dandenong, 3175.  

(03) 9769 2577

Brisbane 

126 Robinson Road, Geebung, 4034  

(07) 3865 2551

Perth 

Unit 2 - 91 Leach Highway, Kewdale, 6105  

(08) 9353 5288

Adelaide 

Sales (08) 8340 8060

www.kerrick.com.au

1300 KERRICK

1300  5 3 7 7 4 2

Australia

New Zealand

Auckland 

12 Greenpark Road, Penrose 

(09) 579 2674      

Wellington   106 Hutt Road, Petone 

(04) 568 7344      

Hamilton  

12A Hall Lane, Frankton 

(07) 847 9111

Christchurch   

(03) 365 5886  

Dunedin  

27 Broughton Street, South Dunedin 

(03) 455 1333

www.kerrick.co.nz

0800 2 KERRICK

0800 2 5 3 7 7 4

Summary of Contents for VH HOSPITAL

















Reviews: