7
Safety instructions
3.2.4 Starting the machine
•
When starting the motor, all drives must be switched off!
•
Do not run the engine indoors!
•
Do not step in front of the single-axle tractor or the implement to start the engine.
•
Do not use jumper fluids when using electric jump start (jumper cable). There is a danger of
explosion!
3.2.5 During operation
•
Never leave the operating position on the guide rail while driving!
•
Never adjust the operating handle while driving - risk of accident!
•
The transport of persons and objects is prohibited!
•
If, for example, the attachment has caught a foreign object and blocked it, stop the engine and
clean the attachment with a suitable tool! Always switch off the engine when handling or cleaning
the implement!
•
Do not leave the operating station until all tools of the attachment have come to a standstill!
•
In the event of damage to the self-propelled implement or attachment, stop the engine immediately
and have the damage repaired.
•
If the steering fails, stop the self-propelled implement immediately and stop the engine. Have the
fault rectified immediately.
•
If there is a risk of slipping on sloping ground, the implement carrier must be secured by an escort
with a pole or a rope. The escort must be located above the vehicle at a sufficient distance from
the work tools! For the helper, it is recommended to wear crampons.
•
If possible, always drive across (horizontally) to the slope!
•
Only drive on rough and dry ground on steep slopes! Moisture and rain increase the risk of slipping
out and slipping.
•
On steep slopes, lattice wheels or sprockets must be used to prevent the tractors from slipping
off.
•
In emergency situations, if, for example, the machine slips sideways in the slope, always release
the handles! You as an operator do not manage with their physical strength to prevent the
cultivator on slipping and are otherwise carried away.
3.2.6 Leaving the machine
•
When stopping the machine, close the fuel cock (if present)!
•
By using wheel chocks or, if necessary, by applying the parking brake, secure the machine from
rolling away when leaving the vehicle.
•
Secure the device against unauthorized use!
•
Switch off the engine and, if present, remove the ignition key or the spark plug connector!
•
Never leave the machine unattended while the engine is still in operation!
Summary of Contents for B00002
Page 22: ...20 Technical specifications...
Page 27: ...NOTE...
