background image

1

4

 

 

4 Disposal 

 

 

This device must be disposed of according to the regulation of the 

municipality or the country.  All possible parts should be recycled and the 
remainder disposed of in a satisfactory manner. 

The company Kersten Maschinenvertriebs GmbH or Kersten (UK) Ltd does 
not take responsibility of disposal. 

 

5 Warranty 

 

The manufacturer guarantees its products for 12 months from the date of 

delivery. 

Parts characterised by faults in materials, mechanical and productions 

processes will be replaced free of charge by the manufacturer through its 

sales and technical servicing network. 

The fault found must be reported to manufacturer and, should the 

circumstances require, be appropriately documented with a written 

technical report and/or photographic material. 

The faulty part must be returned to the manufacturer who, after inspecting 

it and verifying that the warranty is applicable, will repair or replace it, 

taking the necessary time to do so, without charging for either material or 
labour. 

The cost of transport of the parts covered by warranty shall be borne by 

the customer, who may organise it personally or authorise the 

manufacturer to take care of transport and charge all expenses to the 

customer. 

The warranty shall be voided in the following cases: 

- Obvious absence of maintenance 
- Improper use of equipment or interference 

- Use of non-original spare parts or unsuitable lubricants 

- Operations carried out by unauthorised personnel 
-The manufacturer excludes consumable materials and parts subject to 

normal wear and tear from the warranty. 

- Any damages caused during transport must be reported immediately to 

the transporter; otherwise the warranty shall be voided. 

- The warranty does not cover direct or indirect damages caused to persons 

or objects by failure of equipment or due to enforced prolonged suspension 

of its use. 

- When applying for repairs under warranty, please indicate: 

1-serial and model number of the equipment 

2-registration number 
3-date of purchase 

4-dealer name 

 

IMPORTANT! Please complete the warranty registration form enclosed and 
send it to address below within 14 days. 

Kersten (UK) Ltd, 

Progress House, 39 Boulton Road Reading, 

Berkshire RG2 0NH

or info@kersten-machines.com

 

Disposal and warranty 

Summary of Contents for K1500









































Reviews: