9
3.2.7 Wheels and tyres
●
Before working on the wheels ensure the machine has been fully
disabled.
●
Always choc the wheels to prevent the machine from rolling.
●
Regularly check wheel nuts for tightness and retighten if necessary.
●
Repair work on tyres must be carried out by trained personnel using
suitable assembly tools.
●
Check tyre pressure regularly. With too much air pressure the tyres may
explode!
3.2.8
Attaching and detaching implements and accessories
●
Before attempting to attach or detach any implement, ensure the power
unit and any PTO is disabled.
●
Always use appropriate tools, gloves and other suitable safety clothing.
●
When attaching and detaching implements always ensure that all parts
of the equipment are stable and suitably supported at all times.
●
Always apply the parking brake (where fitted) or use chocks to prevent
machines from rolling away.
●
Attachments are often heavy. Always plan in advance how to change the
attachments using the easiest an safest method. This will reduce the
possibility of injury.
●
After attaching implements, ensure all pins are secured and safety
devices are enabled and operational.
●
After attaching implements, visually inspect the complete unit for any
possible fouling areas in and out of work conditions.
Health and Safety
Summary of Contents for K1500
