KESNOS PD606A, User Manual

- 12 -

Check the information below for troubleshooting steps, it will save you time to resolve 
issues that may happen with the unit.

The list includes most of the common cases, but not the results of defective unit, crafts 
or materials in the unit.

lf all troubleshooting steps have been exhausted and the issue is still occurring, please 
feel free to reach out to Waykar Customer Seryice to get further assistance.

Water tank is not placed in a 
proper position

Pull out the water tank and put it 
back properly in the machine and 
make sure the tank is empty.

Room temperature is too high or 
too low: above 95

℉

 or below 41

℉.

This product does not apply to 
over hot or cold environment, the 
machine will automatically enter 
the protection mode in this 
condition.

Room temperature is between 
41

℉

(5

℃

) and 68

℉

 (20

℃

)

The machine will automatically 
defrost when running under lower 
ambient temperature, which is a 
normal phenomenon. It will restart 
dehumification again until the 
defrosting process finished.

Is the ambient humidity lower or 
reaching the preset humidity 
level? (When the room humidity 
has reached or lower than the 
preset level, the dehumidifier 
will enter the Standby Mode)

Please set the humidity by 5%RH 
lower than the room humidity or 
set the humidity to 30%RH.

This is to prevent the frequent 
start of the machine. Does the 
machine stop working just now?

FAULTS AND 
PROCESSING METHODS