18
KESS Power Solutions Gmbh / www.kess.at / info@kess.at
5.6.2 VERTiCAL MoUNTiNG (TowER)
•
Rotate the control panel according to chapter 5.6.1.
•
Take the 4 pieces of plastic supplied with the device and join 2 pieces together
to obtain 2 feet bzw. bases.
•
Place the UPS upright between the 2 feet at a distance of 70 mm (from each
end). See fig. 5.
fig.5: Vertical mounting (tower)
5.6.3 VERTiCAL MoUNTiNG (TowER) wiTh bATTERy ModULE
•
Rotate the LCd monitor.
•
Take the 4 plastic pieces in angle form
(supplied with the UPS ) and the 2 angle
forms supplied with the battery modu-
le. install them to obtain 2 bases to hold
the device and the battery module.
•
Place the UPS and battery module up-
right between the 2 bases at a distance
of 70 mm from each end.
This paragraph refers only to devices with
a single battery module. for devices with
a greater number of battery modules
proceed in a similar way.
fig.6: Vertical Mounting (tower) with battery
module