19
KESS Power Solutions Gmbh / www.kess.at / info@kess.at
5.6.4 MoUNTiNG iN A 19“ CAbiNET
• Proceed as in fi g. 7 to install the device in a 19” cabinet.
• Use the supplied screws to fi x the 2 angle form adapters as handles on each
side of the UPS.
•
To install the device in a rack cabinet, it is necessary to apply the lateral
internal guides as mounting. Alternatively, and on request, we can supply
universal slides as guides. These must be installed by the user. Mount the guides
at the required height, ensure the correct tightening of the fi xing screws and
the appropriate fi tting of the slides.
•
Place the device onto the guides and insert it all the way to the back. it
depends on the device model and weight if it should be installed in the upper
or lower position. it is recommended that 2 people carry out the installation
operations.
•
fix the UPS to the cabinet frame using the screws supplied with the handles.
fig.7: Mounting as a rack device in a 19“ cabinet