Accessories
A
20
A
M6x16
Glue piece
M6x16
max. 15 Nm
fleece tape
piece of felt
SW 4
Glue piece of felt onto the column.
Insert support arms into the grooves.
Affix the support arms by means of the
4 M6x16 screws and the SW4 allen
key to the desired height.
Remove 4 x M6x30 from the guide
column and connect base plate with
the 4 screws and the Torx 30.
Mounting of support arm
!
Assemble or disassemble only
when column is in a lying position!
1 x
TORX 30
max. 15 Nm
4 x
1 x
.
A
Fasten fleece tape over the guide column.
889012120 0000 Page 19 of 27
