ΚESSLER KS 540, Manual

5

16. Product is not intended for infants or individuals who cannot express their

      I

ntentions.

17. Prolonged over-inflation of the bladder may cause ecchymoma of your arm.

18. Do not disassemble the unit or arm cuff. Do not attempt to repair.

19. Use only the approved arm cuff for this unit. Use of other arm cuffs may result in

incorrect measurement results.

20. The system might produce incorrect readings if stored or used outside the 

manufacturer's

specified temperature and humidity ranges.

 Make sure to store the 

       blood pressure monitor outside of accessible range of children, pets and pests.

21. Do not use the device near strong electrical or electromagnetic fields generated by 

cell

phones or other devices, they may cause incorrect readings and interference 

or become

interference source to the device. 

22. Do not mix new and old batteries simultaneously

.

23. Replace batteries when Low Battery Indicator

“

”

appears on screen. 

Replace both

batteries at the same time.

24. Do not mix battery types. Long-life alkaline batteries are recommended.

25. Remove batteries from device when not in operation for more than 3 months.

26. Do not insert the batteries with their polarities incorrectly aligned.

27. Dispose batteries properly; observe local laws and regulations.

28. Only use a recommended AC adaptor double-insulated complying with EN60601-1 

and

EN 60601-1-2.An unauthorized adapter may cause fire and electric shock.

29.

Advising operator that Instruction manual/ Booklet must be consulted.

30. Do not use the device during transport vehicles for influencing measurement

accuracy,

such as patient transport in an ambulance or helicopter.

31.  Do not use the device during transport vehicles for influencing measurement 
       accuracy, such as patient transport in an ambulance or helicopter.

32. Contains small parts that may cause a chocking hazard if swallowed by infants.

33. Please align the polarities of each battery with the +ve and -ve signs

imprinted on

the battery housing when you replace the batteries.

34. The time required for the device to warm from the minimum storage temperature    
       (-25°C) between use until the device is ready for use at Ambient Temperature 
       20°C: about 2 hours.

35.The time required for the device to cool from the maximum storage temperature
      (70°C) between use until the device is ready for use at ambient temperature 
      (20 °C) : about 2 hours