08/2016 Rev. 1.0
Page 7
SiPM
Eval Kit
5 Appendix
5.1 Variant for Optical Bench Mount
The SiPM Evaluation Kit as also available in a different form factor for optical bench mount including the
preamplifier (cf. fig. 5). The PCB with the SiPM is premounted to a Thorlabs® CP02/M Frame (SM1-Threaded
30 mm Cage Plate, 0.35” Thick, 2 Retaining Rings, M4 Tap). The SiPM is centered on the optical axis. The
cables are MCX to SMA and are supplied together with the Evaluation Kit.
5.2 SiPM Bias Source
As an addon to both Evaluation Kits, a SiPM Bias Source is available (cf. fig. 5). It offers an adjustable bias
voltage from 20 to 40 V with either positive or negative polarity. Current limit can be set to either 2 or 20
mA. For full technical specifications please refer to the
KETEK SiPM Bias Source Datasheet.
Fig. 5 SiPM Evaluation Kit for Optical Bench Mount with SiPM Bias Source
Preamplifier
SiPM Bias Source
SiPM premounted in optomechanic frame
www.aptechnologies.co.uk
AP
Technologies Limited The Coach House Watery Lane Bath BA2 1RL
T: +44 (0) 1225 780400 F: +44 (0) 8701 266449 E: info@aptechnologies.co.uk
