INSTALLATION
fig. 8: Collar
4. Mount downlight in ceiling
Note:
For optimal radio communication, ensure that the radio dome is not above or adjacent to
anything metallic.
a. Use bar stock or C-channel (not provided) to mount the D3 in the ceiling. The supports should go
through the holes in the butterfly brackets and can be used to suspend the D3 without screws
(see
fig. 8
).
Note (for flanged housing only):
After mounting, ensure that the D3's collar is flush or sub-flush to
the ceiling plane and does not protrude.
b. Wire-tie at least one bracket to the deck using at least one tie.
5.
Optional:
If using a square aperture with a flange, realign the collar parallel to the wall
a. Loosen the collar’s two outer screws, freeing the collar for rotation.
b. Realign the collar using its v-shaped notches and an alignment string or laser.
c. Re-tighten the screws to lock the collar’s new position.
REVISIONS
ZONE
REV.
ECO
DESCRIPTION
DATE
APPROVED
C
A
C
E
E
A
IN DESIGN
1:1
1
1
2/12/2016
JOHN MICHALKO
TOLERANCES:
C
PROPRIETARY AND CONFIDENTIAL
810-000037-XX
D3, AIMABLE, ROUND
COLLAR, 60HZ, XX DEGREE
01
SCALE:
NOTES:
10 |
D3
INSTALLATION GUIDE
P/N 3662360 Rev C
© 2019-2020 Ketra, Inc. All rights reserved.
