Kettler ALPINE8964-500, Instruction Manual

16

Power on:

1.   Please connect power adaptor to DC jack. Or press the 

RESET key for 2 seconds to reboot the console. LCD will 

have 2 seconds of all segments displaying on the screen 

with a long beep and the wheel diameter of 78” will be 

shown in the mid-upper alphanumeric column.

2. 

Preset clock and calendar by using joggle wheel (UP and 

DOWN) and press the MODE/ ENTER key to confirm.

3. 

Console will show “SELECT USER”, user may press the 

MODE/ ENTER key to enter into user selection mode. Use 

joggle wheel to select U1 to U4 and press the MODE/ 

ENTER key for confirmation. And then preset user 

information for SEX, AGE, HEIGHT and WEIGHT.

4. 

In standby mode, console will display “SELECT 

WORKOUT”; user may press the MODE/ ENTER key to 

enter into selection mode. And use joggle wheel to select 

MANUAL 



 PROGRAM 



 USER PROGRAM 



 H.R.C.

Operation Procedure

Workout in MANUAL mode:

In standby mode, select MANUAL and press the MODE/ 

ENTER key to enter.

Quick start:

 User may press the START/ STOP key to start 

training in MANUAL, all exercise values will start counting up 

from zero.

After enter into MANUAL mode, user may set up TIME 



DISTANCE 



 CALORIES 



 PULSE 



 RESISTANCE LEVEL in 

order with flashing readout texts, and press the START/

STOP key to start exercising. All values will start counting 

down to zero. (Press the RESET key to clear all settings.)

In MANUAL mode, biking animation will move forward once 

every 3 km. PC speed will maintain the same as user’s speed