Kettler Axos Cronos P Assembly Instructions Manual Download

Page: 5 / 40

– EN –

Handling the equipment

• Before using the equipment for exercise, check carefully to

ensure that it has been correctly assembled.

• It is not recommended to use or store the apparatus in a damp

room as this may cause it to rust.

Please ensure that no part of

the machine comes in contact with liquids (drinks, perspiration
etc.). This may cause corrosion.

• The machine is designed for use by adults and children should

not be allowed to play with it. Children at play behave unpre-
dictably and dangerous situations may occur for which the
manufacturer cannot be held liable. If, in spite of this, children
are allowed to use the equipment, ensure that they are instructed
in its proper use and supervised accordingly.

•

This equipment is dependent of revolutions per minute.

• A slight production of noise at the bearing of the centrifugal mass

is due to the construction and has no negative effect upon ope-
ration. Possibly occurring noise during reverse pedalling result
from engineering and are absolutely safe.

• The training device has a magnetic brake system. The braking

system is adjustable

• To operate correctly, the pulse function requires a minimum

voltage of 2,7 volts (only for computers working with batteries).

• Before beginning your first training session, familiarize yourself

thoroughly with all the functions and settings of the unit.

Care and maintenance

• Damaged components may endanger your safety or reduce the

lifetime of the equipment. For this reason, worn or damaged parts
should be replaced immediately and the equipment taken out of
use until this has been done. Use only original KETTLER spare
parts.

• To ensure that the safety level is kept to the highest possible

standard, determined by its construction, this product should be
serviced regulary (once a year) by specialist retailers.

• Use for your regular cleaning, maintenance and care our

appliance maintenance set (Article no. 07921-000) specifically
licensed for KETTLER Sports apparatus and available from the
Sport specialized trade.

• Please ensure that liquids or perspiration never enter the machine

or the electronics.

Instructions for Assembly

RISK

Ensure that your working area is free of possible sources

of danger, for example don’t leave any tools lying around.
Always dispose packaging material in such a way that it may
not cause any danger. There is always a

risk of suffocation

children play with plastic bags!

WARNING!

Please note that there is

always

a danger of

injury when working with tools or doing manual work. The-
refore please be careful when assembling this machine.

• Ensure that you have received all the parts required (see check

list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.

• Before assembling the equipment, study the drawings carefully

and carry out the operations in the order shown by the diagrams.
The correct sequence is given in capital letters.

• The equipment must be assembled with due care by an adult

person. If in doubt call upon the help of a second person, if pos-
sible technically talented.

• The fastening material required for each assembly step is shown

in the diagram inset. Use the fastening material exactly as
instructed. The required tools are supplied with the equipment.

• Bolt all the parts together loosely at first, and check that they have

been assembled correctly. Tighten the locknuts by hand until resis-
tance is felt,

then use spanner to finally tighten nuts completely

against resistance (locking device).

Then check that all screw con-

nections have been tightened firmly.

Attention:

once locknuts have

been unscrewed they no longer function correctly

(the locking

device is destroyed)

, and must be replaced.

• For technical reasons, we reserve the right to carry out preliminary

assembly work (e.g. addition of tubing plugs).

List of spare parts page 34-35

When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the product
(see handling).

Example order:

Art. no. 07648-900 / spare-part no. 68008429

/ 1 pieces / S/N .................... Please keep original packaging
of this article, so that it may be used for transport at a later date,
if necessary.
Goods may

only

be returned after prior arrangement and in

(internal) packaging, which is safe for transportation, in the original
box if possible. It is important to provide a detailed defect description
/ damage report!

Important:

spare part prices do not include fastening material; if

fastening material (bolts, nuts, washers etc.) is required, this should
be clearly stated on the order by adding the words

„with fastening

material“

Waste Disposal

KETTLER products are recyclable. At the end of its useful life please
dispose of this article correctly and safely (local refuse sites).

KETTLER GB Ltd.

Kettler House, Merse Road
North Moons Moat
Redditch, Worcestershire B98 9HL

+44 1527 591901

+44 1527 62423

www.kettler.co.uk