|
|
ENGLISH 47
HEART RATE TEST SCREEN
The graphic below shows the HR TEST screen:
The HR TEST is used to verify the functionality of a heart rate strap. The method of con-
necting the console to either the Bluetooth LE or ANT+ heart rate chest strap is defined
above in under CONNECTIVITY MODE.
The 888 shown above is a placeholder for the actual HR value detected from the connected
heart rate chest strap.
To exit the HR TEST screen and return to the SETTINGS screens the user shall press the
WORKOUTS button.
STATISTICS SCREEN
The graphic below shows the STAT screens:
There are three different statistics provided on the screens above and they are as follows:
•
Total Time – This is the total amount of time, in hours, minutes, and seconds, of all wor-
kouts performed on this given machine; the top value is hours from 0 to 9999, the lower
left value is minutes between 0 and 59, and the lower right value is seconds from 0 to 59
•
Total Distance – This is the total distance, in kilometers, of all workouts performed on
this given machine; this value can switch to miles is the user changes the Units in Set-
tings Mode from Metric to Imperial units
•
Code (i.e. Firmware Version) – This is the current firmware version for the firmware
currently running on the console
To exit any of the STAT screens and return to the SETTINGS screens the user shall press
the WORKOUTS button.
- Button Pressed
+ Button Pressed
- Button Pressed
+ Button Pressed
+ Button
Pressed
- Button
Pressed
Summary of Contents for BK1054-600
Page 75: ... ...
