Kettler GIRO C 1 Manual Download

Page: 5 / 44

Instructions for Assembly

RISK!

Ensure that your working area is free of possible sources

of danger, for example don’t leave any tools lying around.
Always dispose packaging material in such a way that it may
not cause any danger. There is always a risk of suffocation if
children play with plastic bags!

• Ensure that you have received all the parts required (see check

list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.

• Before assembling the equipment, study the drawings carefully

and carry out the operations in the order shown by the diagrams.
The correct sequence is given in capital letters.

• The equipment must be assembled with due care by an adult

person. If in doubt call upon the help of a second person, if pos-
sible technically talented.

• Please note that there is always a danger of injury when working

with tools or doing manual work. Therefore please be careful
when assembling this machine.

• The fastening material required for each assembly step is shown

in the diagram inset. Use the fastening material exactly as
instructed.

• Bolt all the parts together loosely at first, and check that they have

been assembled correctly. Tighten the locknuts by hand until resis-
tance is felt,

then use spanner to finally tighten nuts completely

against resistance (locking device).

Then check that all screw con-

nections have been tightened firmly.

Attention:

once locknuts have

been unscrewed they no longer function correctly (the locking
device is destroyed), and must be replaced.

• For technical reasons, we reserve the right to carry out preliminary

assembly work (e.g. addition of tubing plugs).

• Before use, always check all screws and plug-in connections as

well as respective safety devices fit correctly.

• Always wear suitable shoes when using.
• Nobody may be in the moving range of a training person during

training

List of spare parts page 42-43

When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the product
(see handling).

Example order:

Art. no. 07689-100 / spare-part no. 68009750

/ 1 pieces / S/N .................... Please keep original packaging
of this article, so that it may be used for transport at a later date,
if necessary.
Goods may

only

be returned after prior arrangement and in

(internal) packaging, which is safe for transportation, in the original
box if possible. It is important to provide a detailed defect description
/ damage report!

Important:

spare part prices do not include fastening material; if

fastening material (bolts, nuts, washers etc.) is required, this should
be clearly stated on the order by adding the words

„with fastening

material“

Waste Disposal

KETTLER products are recyclable. At the end of its useful life please
dispose of this article correctly and safely (local refuse sites).

KETTLER GB Ltd.

Kettler House, Merse Road
North Moons Moat
Redditch, Worcestershire B98 9HL

+44 1527 591901

+44 1527 62423

www.kettler.co.uk