Kettler Satura M Manual Download

Page: 5 / 32

Instructions for Assembly

■

Ensure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.

■

Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.

■

Please note that there is

always

a danger of injury when wor-

king with tools or doing manual work. Therefore please be ca-
reful when assembling this machine.

■

Ensure that your working area is free of possible sources of
danger, for example don’t leave any tools lying around. Al-
ways dispose packaging material in such a way that it may not
cause any danger. There is always a

risk of suffocation

if chil-

dren play with plastic bags!

■

The equipment must be assembled with due care by an adult

person. If in doubt call upon the help of a second person, if
possible technically talented.

■

The fastening material required for each assembly step is
shown in the diagram inset. Use the fastening material exactly
as instructed. The required tools are supplied with the equip-
ment.

■

Bolt all the parts together loosely at first, and check that they
have been assembled correctly. Tighten the locknuts by hand
until resistance is felt,

then use spanner to finally tighten nuts

completely against resistance (locking device).

Then check that

all screw connections have been tightened firmly.

Attention:

once locknuts have been unscrewed they no longer function
correctly (the locking device is destroyed), and must be repla-
ced.

■

For technical reasons, we reserve the right to carry out preli-
minary assembly work (e.g. addition of tubing plugs).

List of spare parts page 29-31

When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the pro-
duct (see handling).

Example order:

Art. no. 07861-400 / spare-part no. 10100030

/ 2 pieces / S/N ....................
Please keep original packaging of this article, so that it may be
used for transport at a later date, if necessary.
Goods may

only

be returned after prior arrangement and in

(internal) packaging, which is safe for transportation, in the ori-
ginal box if possible.
It is important to provide a detailed defect description / damage
report!

Important:

spare part prices do not include fastening material; if

fastening material (bolts, nuts, washers etc.) is required, this

should be clearly stated on the order by adding the words

„with

fastening material“

Waste Disposal

KETTLER products are recyclable. At the end of its useful life ple-
ase dispose of this article correctly and safely (local refuse sites).

KETTLER (GB) Ltd.

Merse Road · North Moons Moat · Redditch, Worcesters-
hire B98 9HL · Great Britain

http://www.kettler.co.uk

KETTLER International Inc.
1355 London Bridge Road · VA 23453 Virginia Beach
USA