5
english
Instructions for Assembly
•
Ensure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.
•
Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the diagrams.
The correct sequence is given in capital letters.
•
Please note that there is
always
a danger of injury when working
with tools or doing manual work. Therefore please be careful when
assembling this machine.
•
Ensure that your working area is free of possible sources of
danger, for example don’t leave any tools lying around. Always
dispose packaging material in such a way that it may not cause
any danger. There is always a
risk of suffocation
if children play
with plastic bags!
•
The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if pos-
sible technically talented.
•
The fastening material required for each assembly step is shown
in the diagram inset. Use the fastening material exactly as
instructed. The required tools are supplied with the equipment.
•
Bolt all the parts together loosely at first, and check that they have
been assembled correctly. Tighten the locknuts by hand until resi-
stance is felt,
then use spanner to finally tighten nuts completely
against resistance (locking device).
Then check that all screw
connections have been tightened firmly.
Attention!
once locknuts
have been unscrewed they no longer function correctly (the
locking device is destroyed), and must be replaced.
•
For technical reasons, we reserve the right to carry out preliminary
assembly work (e.g. addition of tubing plugs).
List of spare parts page 25-28
When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the product
(see handling).
Example order:
Art. no. 07653-000 / spare-part no. 70129152
/ 2 pieces / S/N ....................
Please keep original packaging of this article, so that it may be used
for transport at a later date, if necessary.
Goods may
only
be returned after prior arrangement and in
(internal) packaging, which is safe for transportation, in the original
box if possible.
It is important to provide a detailed defect description / damage
report!
Important:
spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this should
be clearly stated on the order by adding the words
„with fastening
material“
.
Waste Disposal
KETTLER products are recyclable. At the end of its
useful life please dispose of this article correctly and
safely (local refuse sites).
KETTLER (GB) Ltd.
Merse Road · North Moons Moat · Redditch, Worcestershire
B98 9HL · Great Britain
http://www.kettler.co.uk
KETTLER International Inc.
1355 London Bridge Road · VA 23453 Virginia Beach USA
http://www.kettlerusa.com
•
Use for your regular cleaning, maintenance and care our appliance
maintenance set (Article no. 07921-000) specifically licensed for
KETTLER Sports apparatus and available from the Sport specia-
lized trade.
•
Please ensure that liquids or perspiration never enter the machine
or the electronics.
•
The equipment is dependent of revolutions per minute.
•
A slight production of noise at the bearing of the centrifugal mass
is due to the construction and has no negative effect upon ope-
ration. Possibly occurring noise during reverse pedalling result from
engineering and are absolutely safe.
•
The crosstrainer has a magnetic brake system.
Summary of Contents for Satura P 07653-000
Page 20: ...20 1 2x klick klick klick ...
Page 22: ...22 3 4 A B A 2x 3 9x13 2x M10x105 ø18x11 3 M10 ...
Page 24: ...24 Handhabungshinweise ...
Page 27: ...27 Ersatzteilbestellung ...
