Kettler Stratos S, Assembly Instructions Manual

4

Assembly Instructions

GB

For Your Safety

Exercise  should be used only for its intended purpose, i.e. for physical

exercise by adult persons.

Any other use of the equipment is prohibited and may be dangerous.

The manufacturer cannot be held liable for damage or injury
caused by improper use of the equipment.

Exercise  has been designed in accordance with the latest standards

of safety. Any features which may have been a possible cause of
injury have been avoided or made as safe as possible.

Incorrect repairs and structural modifications (e.g. removal or

replacement of original parts) may endanger the safety of the
user.

Damaged components may endanger your safety or reduce the

lifetime of the equipment. For this reason, worn or damaged parts
should be replaced immediately and the equipment taken out of
use until this has been done. Use only original KETTLER spare parts.

If the equipment is in regular use, check all its components thoroughly

every 1  -2 months. Pay particular attention to the tightness of bolts
and nuts.This applies especially to the securing bolts for saddle and
handelbars.

To ensure that the safety level is kept to the highest possible

standard, determined by its construction, this  product should be
serviced regulary (once a year) by specialist retailers.

Instruct persons using the equipment (in particular children) on

possible sources of danger during exercising.

Before beginning your program of exercise, consult your doctor to

ensure that you are fit enough to use the equipment. 

Base your

program of exercise on the advice given by your
doctor. Incorrect or excessive exercise may damage your
health!

Any interference with parts of the product that are not
described within the manual may cause damage, or
endanger the person using this machine. Extensive
repairs must only be carried out by KETTLER service staff
or qualified personnel trained by KETTLER.

In case of enquiry, please contact your KETTLER dealer.

In choosing the location of the apparatus, ensure a sufficient safety
distance  from any obstacles. The apparatus must not be mounted
in the immediate vicinity of main passageways (paths, doorways,
corridors).

For a comfortable training position please adjust the handlebar and-
saddle position to your body height.

Before assembling or using the exercise cycle , please read the following instructions carefully. They contain important
information for use and maintenance of the equipment as well as for your personal safety. Keep these instructions in a
safe place for maintenance purposes or for ordering spare parts.

Handling the equipment

Before using the equipment for exercise, check carefully to ensure

that it has been correctly assembled.

Before beginning your first training session, familiarize yourself

thoroughly with all the functions and settings of the unit.

It is not recommended to use or store the apparatus in a damp room

as this may cause it to rust. 

Please ensure that no part of the

machine comes in contact with liquids (drinks, perspi-
ration etc.). This may cause corrosion.

The machine is designed for use by adults and children should not

be allowed to play with it. Children at play behave unpredictably
and dangerous situations may occur for which the manufacturer
cannot be held liable. If, in spite of this, children are allowed to
use the equipment, ensure that they are instructed in its proper use
and supervised accordingly.

The exercise cycle complies with the DIN EN 957 - 1/5, class HB.
It is therefore unsuitable for therapeutic use.

A slight production of noise at the bearing of the centrifugal mass

is due to the construction and has no negative effect upon operation.
Possibly occurring noise during reverse pedalling result from
engineering and are absolutely safe.

Use for your regular cleaning, maintenance and care our appliance

maintenance set (Article no. 07921-000) specifically licensed for
KETTLER Sports apparatus and available from the Sport specialized
trade.

The exercise cycle has a magnetic brake system.

To operate correctly, the pulse function requires a minimum voltage

of 2,7 volts (only for computers working with batteries).

The equipment is dependent of revolutions per minute.

Please ensure that liquids or perspiration never enter

the machine or the electronics.

Before use, always check all screws and plug-in connections as well
as respective safety devices fit correctly.

Always wear suitable shoes when using.

All electric appliances emit electromagnetic radiation when in
operation. Please do not leave especially radiation-intensive appli-
ances (e.g. mobile telephones) directly next to the cockpit or the
electronic controlsystem as otherwise values displayed might be
distorted (e.g. pulse measurement).

Nobody may be in the moving range of a training person during

training.