KEUCO Royal Lumos 14301 171151, Instructions For Use Manual

4

US

Read all instructions before using or installing this product.

Button functions
Button

Function
Light on/o

ff

•  Pressing the button switches the mirror on 

with the selected settings. The white LED 
goes o

ff

 .

•  Pressing the button again switches the mirror 

o

ff

 . The white LED lights up.

•  The white LED can be deactivated.

– Switch on the mirror.

– Press and hold the button for 15 seconds.

- The lighting gets lighter or darker.

- The lighting switches o

ff

  brie

fl

 y and the 

white LED is deactivated.

To switch the white LED back on, repeat the 
described procedure.

Front and wall lighting

•  The front and wall lighting is switched on 

by pressing the button when light mirror is 

switched on.

•  Pressing the button again switches the light 

o

ff

 .

Washbasin lighting

•  The washbasin lighting is switched on by 

pressing the button when light mirror is 

switched on.

•  Pressing the button again switches the light 

o

ff

 .

When both lightings are switched o

ff

 , the light 

mirror also switches o

ff

 .

Dimming the front, wall and washbasin 

lighting

•  Press the button when the light mirror is 

switched on and hold until the desired bright-

ness or the end value has been reached.

The setting is stored and reproduced when 

switched on again (only for connection type 1, 
see 

fi

 gure 2 on page 13).

Setting the light colour cooler

•  Press and hold daylight white button and the 

light colour fades to cool white.

•  Release when the desired light colour has 

been reached.

The setting is stored and reproduced when 
switched on again.

Adjusting light colour - daylight white (cool 
white)

•  Press button and the colour temperature sets 

to 6500 Kelvin.

Button

Function
Setting the light colour warmer

•  Press and hold warm white button and the 

light colour fades to warm white.

•  Release when the desired light colour has 

been reached. 

The setting is stored and reproduced when 
switched on again.

Adjusting light colour - warm white

•  Press button and the colour temperature sets 

to 2700 Kelvin.

Replacement parts with order numbers

, see page 19.

The light sources may only be replaced by the 
manufacturer, its customer service or by an 
equally quali

fi

 ed person.

For information about warranty and mainte-
nance, see the enclosed 

Care Instructions 

and Warranty Card

.

Disposal instructions

This category of device does not belong in 
the domestic waste, but must be disposed of 
separately in accordance with the relevant 
local national regulations.