kewtechcorp.com
kewtechcorp.com
1. Introduction / Product Package
The KT1710 is for voltage and continuity testing.
The tester is constructed according to the latest
international safety regulations which ensures safe
and reliable working when used in accordance to
these instructions.
The KT1710 voltage tester is characterized by
the following features:
• Designed to meet international safety standards.
EN61243-3:2014
• Measurement Category CAT III 600V /
CAT II 690V
• Automatic AC/DC detection
• AC and DC voltage test from 10V up to 690V
with LED indication
• Polarity indication
• Single-pole phase test
• Continuity test
• Detects voltage without batteries
• IP54 (IEC60529)
After unpacking, check that the instrument is
undamaged.
The product package comprises:
1 pc KT1710 tester
2 pcs batteries 1.5V, IEC R03 / AAA
1 pc operating instructions
The tester has been constructed and tested
in accordance with the safety regulations
for voltage testers and has left the factory in a safe
and sound condition.
The operating instructions contain information
and References required for safe operation
and use of the tester. Before using the tester, read
the operating instructions carefully and follow them
in all respects.
2. Safety Measures
Warning of a potential danger, comply with
instruction manual.
Reference. Please pay utmost attention.
Caution! Dangerous voltage. Danger of
electrical shock.
Continuous double or reinforced insulation
Conformity symbol, the instrument complies
with the valid directives. It complies with the
EMV Directive (89/336/EEC), Standard EN 61326-1
are fulfilled. It also complies with the Low Voltage
Directive (73/23/EEC), Standard EN61243-3:2014
is fulfilled.
Tester complies with the standard (2002/96/
EG) WEEE
The instruction manual contains information
and references, necessary for safe operation
and maintenance of the tester.
Prior to using the tester the user is kindly requested
to thoroughly read the instruction manual and
comply with it in all sections.
Failure to read the tester’s manual or to
comply with the warnings and references
contained herein can result in serious bodily injury
or tester damage.
The respective accident prevention regulations
established by the professional associations are to
be strictly enforced at all times
References marked on tester or in
instruction manual:
3
2
