28
DE
2.1 - Produktbeschreibung
Die Antriebe UNDER sind für den Einbau in Automatisierungsanla
-
gen für Tore mit Drehflügeln bestimmt.
Die Antriebe UNDER sind zur Montage an Drehflügeln innerhalb
der in der Tabelle der technischen Spezifikationen aufgeführten
Gewichtsgrenzen entworfen und gebaut.
Die Verwendung der Antriebe für andere Anwendungen als die
oben angegebenen ist verboten.
2 -
PRODUKTEINFÜHRUNG
2.2 - Modell und technische Merkmale
3 - VORABKONTROLLEN
Vor der Installation bitte folgende Punkte prüfen und kontrollieren:
- Kontrollieren ob sich Tor oder Tür für die Automatisierung eignen.
- Gewicht und Größe des Tors oder der Tür müssen innerhalb der
maximal zulässigen Einsatzgrenzen liegen, die in Abb. 2 angege-
ben sind.
- Kontrolle des Vorhandenseins und der Stärke der mechanischen
Sicherheitsanschläge des Tors oder der Tür.
- Sicherstellen, dass der Befestigungsbereich nicht überflutet wer
-
den kann.
- Überhöhter Säure- oder Salzgehalt oder die Nähe von Wärme-
quellen können Fehlfunktion des Produktes verursachen.
- bei extremen klimatischen Verhältnissen (wie z.B. Schnee, Eis,
hohe Temperaturunterschiede, hohe Temperaturen) könnten sich
die Reibungen verstärken, deshalb könnte der Kraftaufwand für
die Bewegung und das Anlaufmoment höher sein als im Normal-
zustand.
- Kontrollieren, dass die manuelle Bewegung des Tors oder der Tür
flüssig und ohne Reibungspunkte ist und keine Entgleisungsgefahr
besteht.
- Prüfen, dass sich das Tor oder die Tür im Gleichgewicht befindet
und folglich in jeder Stellung stillsteht.
- Prüfen, dass die Stromleitung für den Anschluss des Produkts
über eine gesicherte Erdung verfügt und mit einem Leitungsschutz-
und Differentialschalter geschützt ist.
– Im Stromnetz der Anlage eine Abschaltvorrichtung mit ausrei-
chender Öffnungsweite der Kontakte vorsehen, die, wie von der
Überspannungskategorie III gefordert, die komplette Abschaltung
erlaubt.
- Sicherstellen, dass das gesamte benutzte Material den geltenden
Normen entspricht.
Art.
Beschreibung
INT
Automatisierungsset für Drehtore bis 3,5 m pro Flügel, 230 Vac Antrieb, Endanschläge in Öffnung sowie auch in Schließung.
Kabellänge 1,5m
INTOIL
Automatisierungsset für Drehtore bis 3,5 m pro Flügel, 230 Vac Antrieb, Endanschläge in Öffnung sowie auch in Schließung.
Kabellänge 1,5m, in Ölbad geschmiert
INT10
Automatisierungsset für Drehtore bis 3,5 m pro Flügel, 230 Vac Antrieb, Endanschläge in Öffnung sowie auch in Schließung.
Kabellänge 10m
INT24
Automatisierungsset für Drehtore bis 3,5 m pro Flügel, 24 Vdc Antrieb, ohne Impulsgeber und mit Endanschlägen in Öffnung
sowie auch in Schließung
TECHNISCHE DATEN
MODELL
INT
INTOIL
INT10
INT24
TECHNISCHE MERKMALE
Drehmoment
Nm
300
300
300
250
Arbeitszyklus
%
30
30
30
80
Öffnungszeit auf 90°
sec
20
20
20
18-25
Central command
CT202
CT202
CT202
14AB2
Versorgung
Vac (Vdc)
230
230
230
(24)
Leistungsaufnahme
A
1
1
1
5
Motorleistung
W
230
230
230
120
Kondensator
µF
10
10
10
-
Thermoschutz
°C
150
150
150
-
Schutzart
IP
67
67
67
67
Größe
(B - T - H)
mm
412 - 346 - 160
412 - 346 - 160
412 - 346 - 160
412 - 346 - 160
Gewicht
Kg
11
11
11
10,8
Betriebstemperatur
°C
-20°+55°
-20°+55°
-20°+55°
-20°+55°
Maximale Türgewicht
Kg
600
600
600
600