3
Pushbutton Control
Your KD-2X1/KD-4X1 unit may be controlled via the pushbutton on the front of the unit. Select
your desired input by depressing the “Input Select” button. The front LED indicators (1, 2, 3, 4)
correspond to the input that has been selected.
IR Remote Control
The KD-2X1/KD-4X1 can also be operated using the IR remote control provided with your unit.
The KD-2X1/KD-4X1 switcher features an IR sensor on the front of the unit for reception of the IR
command signals.
1
2
3
4
1
2
3
R1
4
5
7
8
6
R2
0
9
R3
Device Select
Auto
Power Off
Power On
www.keydigital.com
Input
Sasha 10/16/2009
1
2
3
4
1
2
3
R1
4
5
7
8
6
R2
0
9
R3
Device Select
Auto
Power Off
Power On
www.keydigital.com
Input
Input Select
Input Select
Scroll Up/Down
R1, R2, R3
Reserved for future use
Numeric Keypad
All buttons not listed/
described in this manual
are currently inactive
IR Emitter Control
When using an IR Emitter / IR Extender (sold separately), the IR Emitter must be mounted over the
IR Sensor on the front of the KD-2X1/KD-4X1 unit. One end of the cable is connected to the IR
Receiver / Master Controller / IR Extender / IR Connecting Block, while the other end is mounted
over the IR Sensor of the KD-2X1/KD-4X1 unit.
Summary of Contents for Champion KD-2X1
Page 11: ...9 ...
