16
17
Important Product Warnings:
1.
Connect all cables before providing power to the unit.
2.
Test for proper operation before securing unit behind walls or in hard to access
spaces.
3.
If installing the unit into wall or mounting bracket into sheet-rock, provide proper
screw support with bolts or sheet-rock anchors.
Safety Instructions:
Please be sure to follow these instructions for safe operation of your unit.
1.
Read and follow all instructions.
2.
Heed all warnings.
3.
Do not use this device near water.
4.
Clean only with dry cloth.
5.
Install in accordance with the manufacturer’s instructions.
6.
Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
7.
Only use attachments/accessories specified by the manufacturer.
8.
Refer all servicing to qualified service personnel. Servicing is required when the
device has been damaged in any way including:
»
Damage to the power supply or power plug
»
Exposure to rain or moisture
Power Supply Use:
You MUST use the Power Supply
provided
with your unit or you
VOID
the Key Digital
®
Warranty and risk damage to your unit and associated
equipment.
Use with third-party HDBaseT Tx or Rx
KD-X440WP Tx and Rx are NOT compatible with third-party HDBaseT or other Key
Digital HDBaseT product because of its unique PoH (power over HDBaseT) feature.
Specifications
Technical:
➔
Inputs Tx: 1 HDMI, 1 DB15, 1 3.5mm Stereo Audio, 1 IR Sensor
➔
Outputs Tx: 1 CAT5e/6 UTP/STP, 1 Bi-Directional RS-232
➔
Inputs Rx: 1 CAT5e/6 UTP/STP
➔
Outputs Rx: 1 HDMI, 1 Bi-Directional RS-232, 1 IR Out
➔
DDC Signal (Data): Input DDC Signal: 5 Volts p-p (TTL)
➔
HDMI Video/Audio Signal: Input Video Signal: 1.2 Volts p-p
➔
HDMI Connector: Type A, 19 Pin Female
➔
RJ45 Connector: Shielded Link Connector, HDBaseT
➔
IR Connectors: 1 IR Sensor, 1 3.5mm mono
➔
RS-232 Connector: 3-pin phoenix terminal
General
➔
Regulation: CE, RoHS, WEEE, EAC
➔
Enclosure: Tx unit: Brushed aluminum face with black metal backing
Rx unit: Black metal
➔
KD-SX440WPTx: 3.21” x 2.06” x 0.787” (Wall-plate), Weight: 0.7 lbs
➔
KD-SX440Rx: 5.07” x 4.08” x 0.787”, Weight: 0.4 lbs
➔
KD-SX440Rx Power: 24V/1.67A (40W) Power Supply
➔
Accessories: 24V 1.67A DC power supply (qty 1), Aluminum decora plate (qty 1),
Decora mounting screws with flat head (qty 4), Gang-box mounting screws
(qty 4), Mounting bracket (qty 2), IR Emitter (qty 1), 3-pin phoenix terminal (qty 2)
Summary of Contents for KD-SX440WP
Page 12: ...20 21...
