521 East 3
rd
Street Mt. Vernon, NY 10553
• www.keydigital.com
Rev 0
– Aug, 2020
6
Quick Setup Guide
Begin with the KD-UPS52U and KD-X100MRx, KD Transmitter (sold separately), all source, display
devices, audio system, and any other connected peripherals powered off.
Connect
1.
Connect video sources
into the HDMI, Display Port, and USB-C input ports of KD-UPS52U
a. (Optional) Connect HDMI, Display Port, USB-C, VGA sources to wall plate / table transmitter
(sold separately). Port connectivity varies by transmitter model.
2.
Connect video displays/projectors
to the HDMI output ports of KD-UPS52U and/or KD-X100MRX
3.
Connect USB hosts and devices.
For USB camera, microphone, speakers, audio DSP, keyboard, or
mouse integration, connect USB devices into desired USB A ports and USB host computer to desired
USB B ports at KD-X100MRx, KD-UPS52U, or Transmitter.
a. USB devices must be connected at same location, see
USB Modes Selection Table
for more
information.
b. Ensure USB toggle switches have chosen USB Device or Host as desired.
4.
Connect CAT5e/6 cabling
from KD-
UPS52U’s HDBaseT outputs to KD-X100MRX HDBaseT input and
(optional) from KD-
UPS52U’s HDBaseT input to transmitter (sold separately)
5.
Connect audio
to send audio of the select source into KD-Amp220 use KD-
UPS52U’s analog audio de-
embed port. For other audio systems use the digital or analog outputs ports located on KD-UPS52U or
KD-X100MRx.
6.
Connect RS-232 wiring for Integrated System.
If utilizing KD-AMP220 or KD-CAMUSB integration
control mode, connect RS-232 wiring from KDUPS52U Unit Control TxD and Ground pins into KD-
AMP220 and KD-CAMUSB RxD and Ground. Using a stripped mono or stereo audio cable is
recommended, but other cables will work as well. See below diagram
7.
Connect Control System
. For KD-App control and/or IP control from a control system or PC, connect
TCP/IP port to network. RS-232 and IR control may also be utilized, but IP control is required for KD-
CamUSB and KD-Amp220 integrated systems.
8.
(
Optional) Connect display/projector’s IR/RS-232
from control system into pass-thru ports of KD-
UPS52U and IR/RS-232 ports of the KD-X100MRX.
a. Alternatively, KD-UPS52U CEC Manager features can send power on and off commands via
CEC on the HDMI connection.
9.
Connect power.
Screw-in power supply to the KD-UPS52U unit, and then connect power to outlets.
10. Power on sources, displays, audio systems, connected computers, USB devices and hosts to use
system.
