8
Use with third-party HDBaseT Tx or Rx
KD-X2x1WDTx and KD-X2x1WVTx are
NOT
compatible with third-party HDBaseT or
other Key Digital HDBaseT products, because of their unique PoH (Power over
HDBaseT) feature
Unit Configuration with KDMS
™
Pro
KD-X2x1WVTX’s video scaling features are most easily configured using Key Digital
®
Management
Software
™
Pro (KDMS
™
Pro) that can be downloaded here:
https://goo.gl/ZcyHui
KD-X2x1WDTx also may be configured used KDMS
™
Pro, however most settings are easily accessed using
the physical rotaries and slide switches on the unit.
1.
Connect to KD-X2x1WVTx / KD-X2x1WDTx from
your PC using the USB micro port on the face of
the unit
2.
Open the Key Digital
®
Management Software
™
Pro software and perform a USB scan (fig. 1a)
3.
Choose the detected device from the Devices window (fig. 1b)
4.
In the Input/Output Settings window, choose the following settings,
»
a. Set the desired EDID handshake that will be provided to the VGA source (fig. 1c)
»
Note: Use the EDID rotary on the face of the unit to choose the desired handshake that will be
provided to the connected HDMI source.
»
b. Set the desired output video resolution, aspect ratio, and picture mode that will be applied to the
VGA source (fig. 1d)
