7
›
USB Service Port
: Used for initial setup, control,
and firmware upgrades
»
Micro USB connector
»
Used for configuration and control from PC via
KDMS Pro, KDMS, or third-party control terminal
»
Used for firmware updates (consult with Key Digital tech support before updating firmware)
»
Supports USB driver for Windows 10, 7, XP, Mac, Linux
»
Will register as “Prolific USB-to-Serial Comm Port in Device Manager
»
Can be used as RS-232 control port. Baud rate is 57,600.
›
Reset Pin
: Performs a soft reboot of the
wall-plate transmitter
»
Press and hold for 5 seconds and the HDMI
and Display Port Input lights will blink twice to
confirm the reset is complete
›
Power, Link, Video LEDs
:
Indicate system connectivity status
»
Power (
red
) illuminates solid with proper
powering from Rx unit / presentation switch
»
Link (
blue
) illuminates solid from healthy HDBaseT connectivity with Rx unit / presentation switch
»
Video (
green
) illuminates solid with active HDMI/Display Port signal.