15
-- System Control Setup Commands: --
-- SPC AS x : Set Auto Sense Mode x = [0=OFF,1=AUTO,2=FORCED ON] --
-- SPC FB E/D : Enable/Disable Front Panel Buttons --
-- SPC RSB z : Set USB RS232 Baud Rate to z bps, z=[0-5] --
-- [0:115200, 1:57600, 2:38400, 3:19200, 4:9600, 5:4800] --
-- SPC DF : Reset to Factory Defaults --
-- SPC DF00 : Reset to Factory Defaults without Network Reset --
-------------------------------------------------------------------------
Status Command (STA). Returns unit status and settings in readable format:
-------------------------------------------------------------------------
-- Key Digital Systems STATUS --
-------------------------------------------------------------------------
-- Model: KD-X4x1WUTx, Device Name: X4x1WUTx_0001 --
-- Main F/W Ver: 1.14, CEC Ver: 1.02 --
-- --
-- USB(RS232): Baud Rate=115200bps, Data=8bit, Parity=None, Stop=1bit --
-- Front Panel Button : Enabled --
-- --
-- Network Setting(Web Server/TCP Control) Status --
-- MAC Address = 26:5F:78:24:E7:45 --
-- Host IP Address = 192.168.001.239 --
-- Net Mask = 255.255.255.000 --
-- Router IP Address = 192.168.001.001 --
-- TCP Port = 0023 --
-- --
-- Video Input Status --
-- EDID = DEFAULT 10, FORCED HPD = OFF, AUTO SENSE = OFF --
-- 01 : HDMI1, LINK = OFF --
-- 02 : HDMI2, LINK = OFF --
-- 03 : USB C, LINK = OFF --
-- 04 : DP , LINK = OFF --
-- --
-- Video Output Status (D=Disable, E=Enable) --
-- HDBT Output : IN = 01, OUT = ON , V/MUTE = D, LINK = OFF, DBG = OFF --
-- LRM = OFF --
-- --
-- Display Output Status (CEC Control) --
-- HDBT Output : TV = ON , A/V MUTE = Disable, A/MUTE = Disable --
-------------------------------------------------------------------------
