2
Included Accessories
›
USB-A to USB Micro Data Cable
›
Aluminum decora plate (qty 1) + Decora mounting screws with flat head (qty 6)
›
Gang-box mounting screws (qty 6)
›
3-pin phoenix terminal (qty 1)
›
2-pin phoenix terminal (qty 1)
Quick Setup Guide
Rx UNITS SOLD SEPARATELY. Go to
Presentation Solutions section
for compatible Rx models.
CONNECT:
Begin with the KD-UPS52U unit, KD-X100MRx, KD-X4x1WUTx, USB camera (sold separately), all
input/output devices, and audio system powered off.
1.
Connect HDMI, Display Port, and USB-C sources to the input ports of Tx unit
2.
(Optional) Connect HDMI, Display Port, USB-C, VGA sources to presentation switcher (sold
separately) . Port connectivity varies by presentation switcher model .
3.
Connect HDMI displays / projectors to the HDMI output port of the RX unit / presentation switcher
4.
Connect USB devices into desired USB A ports and USB host computer to desired USB B ports at
wall plate transmitter, HDBaseT Rx, or presentation switcher .
»
a . Note: When using KD-UPS52U presentation switcher the connection location of the USB
devices and host is determined by the USB mode selection switch . Please refer to KD-UPS52U
Quick Setup Guide for more information .
5.
Connect CAT5e/6 cabling to Tx and Rx unit / presentation switch . Use 568-B standard termination
on both ends . Avoid couplers and excess CAT cable length .
6.
To send the selected audio source into audio systems, connect from the analog or digital audio de-
embed outputs of the Rx unit / presentation switcher
7.
Connect control system or PC to LAN port of the KD-X4x1WUTx or the Rx for network connectivity
8.
Connected monitors are controlled by CEC Manager
™
on the HDMI connection . Alternatively,
connect IR/RS-232 wiring from control system into pass-thru ports of KD-X4x1WUTx and IR/RS-232
ports of the Rx unit / Presentation Switch
9.
Screw-in power supply to the KD-UPS52U or KD-X100MRx unit, and then connect power to outlets .
10.
Power on HDMI sources and displays, audio systems, connected computers, USB devices and hosts
