5
CONFIGURE:
Configure and control your KD-X4x1WUTx via Key Digital Management Software
™
Pro (KDMS
™
Pro)
1.
Connect to KD-X4x1WUTx from your PC using the USB micro port on the face
of the unit
2.
Open KDMS
™
Pro software and perform a USB Device scan (fig . 1a-1b)
3.
Choose the device from the Devices window (fig . 2a)
4.
Set the desired Device Name in the KD-X4x1WUTx Information window (fig . 2b)
5.
In the Network Settings section of the Properties window, enter the desired IP settings (fig . 2c)
»
a . IP Address (default is 192 .168 .1 .239)
»
b . Subnet Mask (default is 255 .255 .255 .0)
»
c . Gateway (default is 192 .168 .1 .1)
»
d . Port (default is 23)
»
i . Note: If using KD-App, please do not change the port number .
6.
Save (fig . 2d)
