4
ILLUSTRATIONS
KEYANG
DID-1202L CORDLESS IMPACT DRIVER
e)Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the power tool
in unexpected situations.
f)Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts.
Loose clothes, jewellery or long hair can be
caught in moving parts.
g)If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used.
Use of dust collection can reduce dust
-
related hazards.
4) Power tool use and care
a)Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it was
designed.
b)Do not use the power tool if the switch
does not turn it on and o
ff
.
Any power tool that cannot be controlled
with the switch is dangerous and must be
repaired.
c)Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories, or
storing power tools.
Such preventive safety measures reduce the
risk of starting the power tool accidentally.
d)Store idle power tools out the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e)Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other
condition that may a
ff
ect the power tools
operation. If damaged, have the power
tool repaired before use.
Many accidents are caused by poorly
maintained power tools.
f)Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g)Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed.
Use of the power tool for operations di
ff
erent
from those intended could result in a
hazardous situation.
5) Battery tool use and care
a)Recharge only with the charger speci
fi
ed
by the manufacturer.
A charger that is suitable for one type of
battery pack may create a risk of
fi
re when
used with another battery pack.
b)Use power tools only with speci
fi
cally
designated battery pack.
Use of any other battery packs may create a
risk of injury and
fi
re.
c)When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws, or
other small metal objects that can make a
connection from one terminal to another.
Shortening the battery terminals together may
cause burns or a
fi
re.
d)Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs,
fl
ush with
water. If liquid contacts eyes, additionally
seek medical help.
Liquid ejected from the battery may cause
irritation or burns.
6) Service
a)Have your power tool serviced by a
quali
fi
ed repair person using only
identical replacement parts.
This will ensure that the safety of the power
tool is maintained.
2. Speci
fi
c Tool Safety Warnings
•
Do not use the charger under the rain or
when it is wet.
Failure to observe this can cause serious
injury or death due to electric shock.
•
Do not insert metal wire or any
conductive object through the ventilating
opening of the charger.
Failure to observe this can cause serious
injury or death due to electric shock.
•
Do not attempt to disassemble the
charger and keep the charger out of the
reach of children.
EN
