of power source must agree with the voltage
speci
fi
ed in the name plate.
• Please check if the rated voltage of the
product is same as the rated voltage of the
battery.
Using the battery with higher rated voltage
than the rated voltage of the drill can result
in burning and damaging of the motor.
2) Attachment of the battery
Make sure the battery is attached correctly
before you use the tool.
Make sure the battery is attached in the body
of the tool tightly before you start operation.
When the battery is not attached tightly, it
may be fallen during the operation and cause
an injury in the top of your foot.
3) Polarity of the battery
When the polarity of the battery is not correct,
it may cause the trouble of the switch. Also,
the reversal of the rotating direction can bring
a dangerous situation.
4) Trial run
Before starting the work, wear protection
(goggles, safety helmet, ear plugs, protective
gloves) and run the tool in the direction
avoiding other persons to see if the tool is
operated normally.
5) An explanation of any symbols or
pictogram on the tool relevant to safe use.
EC Declaration of conformity
We declares that these products meet the
standards
EN 60745
-
1, EN 60745
-
2
-
2, EN 60335
-
1,
EN 60335
-
2
-
29, EN 55014
-
1, EN 55014
-
2,
EN 61000
-
3
-
2 and EN 61000
-
3
-
3 ( Category
װ
)
in compliance with directives 2006/42/EC(MD),
2004/108/EC(EMC), 2006/95/EC(LVD).
5. Noise and Vibration Emissions
1) Noise and vibration
Noise emission values determined according to
EN 60745
6
SPECIFICATIONS
KEYANG
DID-1202L CORDLESS IMPACT DRIVER
yGGG
GG\W
G
tUG\W
{G
Return waste material The battery
temperatures over 50ºC
cause damage
kGGG
G
kGGG
GG
U
Do not incinerate the
battery pack
Do not dispose of
batteries with genearl
refuse.
Volts
Direct Current
No load speed
Revolutions or reciprocations
per minute
(Legally binding signature of the issuer)
Ki Hwang, Lee
Director of R&D and Quality Assurance
(Legally binding signature of the issuer)
Ki Hwang Lee
Director of R&D and Quality Assurance
Wear safety helmet
Wear protective gloves
Wear goggles
Wear ear plugs
Power Tool
DID
-
1202L
A weighted emission sound power level
[L
WA
] [dB(A)]
Uncertainty [K] [dB(A)]
103
92
3
A weighted emission sound pressure level [L
pA
] [dB(A)]
EN
o
W
m