Place the spring on the spindle and insert through the door into the front lock hub.
If the door was previously prepared with a 2 ⅛” face bore, use the retrofit mounting plate and
screw to secure the bottom post of the front lock housing.
Install Panic Bar
Place the panic bar onto the door interior, fitting the spindle into the panic bar hub.
Summary of Contents for CG-PK
